A2B Electronics MyM-3S Micro Master Guia de Instalação Página 1

11MyM-3S Micro MasterInstallation Guidedesign for TVEnglish

10English5.3 Output settings Modulation/BandStart the output setup by selecting which band you want to use. You can select VHF-7, VHF-8 and UHF. VHF-7

11EnglishAdvanced/Aspect ratioSet correct picture format of the programs transmitted from the MyM-3S. Video standardSelect your regional video standar

12English5.4 Service ManagementThe MyM-3S contains 2 separate DVB-S/S2 tuners and totally 3 services can be selected for each of output channels, name

135.6 System optionsUpload/UpgradeThe Upgrade menu is used to be able to download software Upgrades or future software functionality.The procedure of

1414The MyM-3S can be installed either as a stand alone unit directly on the wall or by the use of a dedicated MyM Security Wall Mount (part number 70

1515English2 x DVB-S/S2 Satellite Receiver3 x Modulator3 x MPEG Decoder – Video - audioMiscellaneousAC Power supply 230 VAC typ (94-264VAC)AC power co

1616The document for Declaration of Conformity is available for download from www.a2b.se.Further information at www.a2b.se.English8 Declaration of Co

17EnglishDVB Digital Video Broadcasting (Standardization body)MPEG-2 Compression format for digital TVMPEG-4 Compression format for digital TV (SD and

18Notes

19Notes

221. Introduction2. Unpacking the unit3. Connections and indications4. IP settings5. Menus and settings5.1 Overview menu5.2 Input settings5.3 Output s

2020www.a2b.seA2B Electronics ABSödra Allén 23-25, 591 37 MotalaP.O. Box 14, 591 21 MotalaSWEDENPhone +46 141 229100Fax +46 141 229101E-mail market@a2

33Thank you for purchasing an A2B Electronics product. The MyM-3S is a revolutionary solution for reception and modulation of satellite transmitted TV

44The following items are included in the package:AmountDescription1 MyM-3S Micro Master1 Installation guide 2 Power supply 12 VEvery unit is quality

55English1. Satellite input 1 Connect one satellite (LNB) input here2. Satellite input 2 Connect second satellite (LNB) input here3. Power connector C

6The MyM-3S has an embedded web server allowing standard web browsers (Internet Explorer, Firefox, Opera etc.) to connect to the unit for settings an

77EnglishSelect [Use this IP adress] and write: 192.168.0.19 and select [Net mask] 255.255.255.0. Click [OK] and then click[Close].NOTE! For PC with o

8English5.1 Overview menu[Current settings]Contains information of current input and output signals, if the tuners are locked to a signal, firmware ve

99English5.2 Input settingsAs the MyM-3S contains 2 separate tuners, start by selecting either [Tuner 1] or [Tuner 2]. Select the modulation typeyou w